Table of Contents
Advertisement
3.13 Upgrading System Firmware
GeoV
ision periodically releases the updated firmware on the website.
Updat
e your camera to the latest firmware through its Web interface.
IMPORTANT:
1.
Stop monitoring of the camera.
2.
Stop the connection to GV-System.
3.
While the firmware is being updated,
A.
the power supply must not be interrupted, and
B.
do not unplug the Ethernet cable if the cable is the source of
power supply (Power over Ethernet or PoE supported).
4.
The interruption of power supply during updating causes not only
update failures but also damages to your camera. In this case,
please contact your sales representative and send your device back
to GeoVision for repair.
5.
Do not turn the power off for 10 minutes after the firmware is
updated.
60
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-IP Speed Dome and is the answer not in the manual?