Installation; Indoor Speed Dome Mount: Surface Mount - GeoVision GV-IP Speed Dome Quick Start Manual

3.3 Installation

T here are several mounting methods for GV-IP Spee
St art Guide, we only show you the standard mountin
standard packing. For other mounting methods, refer to GV-IP Speed Dome
GV-SD200 User's Manual.

3.3.1 Indoor Speed Dome Mount: Surface Mount

1. Mark the positions of the three sc
Mount at the chosen installation
2. In the marked locations, drill eac
supplied Screw Anchors, and put
holes.
3
d Dome. In this Quick
g methods with the
GV-M ountD603
(Sup plied)
rew holes on the Hard Ceiling
location.
h hole slightly smaller than the
supplied Anchors into these drilled
GV-SD200 / SD200-S
35