Table of Contents
Advertisement
3.
Attach the Waterproof Rubber to the Mi
4.
Run the cable(s) through the Mini Pendent Mount.
Note:
Bloc the cable entr
k
insects ente
ring the
w s a
ay
s s
ho
wn in
5.
Thread t
he cable(s) through the Mounting Kit and join the Mounting
Kit to the Mini Pendent Mount with the supplied screws and washers.
Then adjust the Waterproof Rubber to the joint.
6.
Connect the cable(s) to the Dome Camera.
7.
Join the Dome Camera to the Mounting Kit with the supplied screw
and washers.
y hole with the supplied sponge to avoid
Pendent Mount. The sponge can be placed in two
the illu rations below.
st
Sponge
3
GV-SD200 / SD200-S
ni Pendent Mount.
Sponge
39
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-IP Speed Dome and is the answer not in the manual?