Transfer of an active call from the DECT handset to the phone
A call is being made on the DECT handset. Proceed as follows to transfer the call
to the table phone:
On the table phone, pick up the receiver or press the Speaker key
"Please put down DECT receiver" is shown on the table phone
On the DECT device, press the "Put down receiver" key
The call is transferred. The status is shown on the table phone display
Establish second connection
The R key is used to put the current call on hold. You can now enter the number
for another party. The second call can be ended with the R key. In this case the
first call (on hold) is activated.
Accept call waiting
An acoustic signal is sounded for a second incoming call (call waiting) and can be
accepted with key sequence R-2. The first call is automatically put on hold.
Decline call waiting
Decline a call waiting with key sequence R-0.
Toggle
Toggle between the calls with key sequence R-2.
End call
Key sequence R-1 ends the current call. The call on hold is activated.
Conference
An active connection and one on hold can be linked into a conference call with
key sequence R-3. The conference call can be ended by hanging up or by re-
entering key sequence R-3.
Connect
An active connection and one on hold can be connected with key sequence R-4.
Using a DECT handset
40