Using A Dect Handset; Using A Dect Gap Handset; Incoming Calls; Manual Dialling - TIPTEL 3130 User Manual

Using a DECT handset

If the optional USB DECT dongle is used you can use either a DECT GAP or a
DECT CAT IQ 2.0 handset. For compatible CAT IQ handsets please check infor-
mation at http://wiki.tiptel-info.de.

Using a DECT GAP handset

This chapter describes how to use a DECT GAP handset.
The phone and the DECT handset indicate an incoming call. The call can be
accepted on both devices.

Incoming calls

The phone and the DECT handset indicate an incoming call. The call can be
accepted on both devices.

Manual dialling

Use the numeric keypad to enter the required number. To dial a telephone num-
ber entered, press the "Pick up receiver" key. The connection is established and
you can make your call.

Transfer of an active call from the table phone to the DECT handset

A call is being made on the table phone. Proceed as follows to transfer the call to
the DECT handset:

On the DECT phone, press the "Pick up receiver" key

"Please put down receiver" is shown on the table phone

On the table phone, put down the receiver or press the Speaker key

The call is transferred. The status is shown on the table phone display
Using a DECT handset
39