Using The Headset - TIPTEL 3130 User Manual

Using the headset

Using the headset
A headset can be used with your phone. A wireless headset, compatible with the
DHSG standard for wireless equipment, is connected to the rear of the phone. A
headset has a button for accepting and hanging up. A non-wireless headset is
connected to the underside of the unit. This headset does not have a button for
accepting and hanging up.
To use a non-wireless headset, one of the function keys must be assigned the
"Headset" function. This is not an absolute requirement for a DHSG-compatible
headset but it is recommended.
A headset connected to the phone is detected automatically. The headset symbol
is displayed in standby mode.
The function key assigned the "Headset" function lights up green when the head-
set is active. You can also deactivate the headset with this key.
When the headset is active, outgoing connections are automatically established
with the headset and incoming calls are routed to the headset on pressing the
"Accept" softkey. If the headset is deactivated with the function key assigned
function "Headset", the hands-free function is used instead of the headset in both
cases. The function key assigned the "Headset" function flashes red for incoming
calls. The call can be accepted with this key (even when the headset is inactive).
The function key then lights up red. During a call held over the headset, the
function key assigned the "Headset" function can be used for hanging up.
Switchover to handset, listen in, hands-free mode and pickup by a DECT handset
is possible at any time whilst the headset is being used.
38