Setting The Call Transfer Function - TIPTEL 192 Operating Instructions Manual

System settings

Setting the call transfer function

1. Press the
"settings".
2. Press the
3. Press the
"system".
4. Press the
5. Press the
6. Press the
"ECT".
7. Press the
8. Press the
9. Press the
Setting the call diversion (CD) function
1. Press the
"settings".
2. Press the
3. Press the
"system".
4. Press the
5. Press the
6. Press the
"call diversion".
7. Press the
8. Via the numeric keypad, enter a tele-
phone number to which the incoming
call shall be transferred.
9. Press the
or button to select
button.
or button to select
button.
button.
or button to select
button.
or button.
button.
or button to select
button.
or button to select
button.
button.
or button to select
button.
button.
Every time you press the button, the display
switches between the available functions.
The display shows "system".
The display shows "ISDN".
The display shows "MSN".
The display shows "ECT".
The display shows the current setting.
Every time you press the button, the display
switches between:
ON: Call transfer via ECT is activated.
OFF: Call transfer via ECT is deactivated.
The setting is stored.
Every time you press the button, the display
switches between the available functions.
The display shows "system".
The display shows "ISDN".
The display shows "MSN".
The display shows "call diversion".
The display shows "enter target number".
The number is shown in the display.
The setting is stored.
31