Intercom; During An Active Call; Mute - TIPTEL IP 286 Manual

Enterprise IP Phone

Intercom

Intercom mode is useful in an office environment as a quick access to connect to the
operator or the secretary.
To configure Intercom option via phone interface:
1) Press the following hot keys: Menu->Features->Intercom->OK to enter the
configuration page.
2) Intercom Allow: To set whether to answer the incoming intercom calls.
3) Intercom Mute: To set whether to mute the incoming intercom calls automatically.
4) Intercom Tone: To set whether to play ring tones when there is incoming intercom
calls to your extension.
5) Intercom Barge: To set whether to answer the incoming intercom calls during a
conversation. If the option is enabled, when there is incoming intercom calls to
your extension, if you are on an intercom conversation, it will refuse the call
automatically; or it will put the current call on hold and put the incoming intercom
call through.
6) Choose and set the different options by navigation keys and the Switch soft key.
7) Press the Save soft key to save your changes.

During an Active Call

Mute

This function allows you to mute the microphone of the active audio device during a call;
you cannot be heard by the other party. You can still hear all other parties while mute
is enabled. When you press the MUTE button all of the conversation will be muted.
To mute/resume a conversation:
Press MUTE button during a conversation, the icon
again to get the microphone return to normal conversation.
Using the Basic Call Functions
will be shown in the LCD. Press it