During An Active Call; Mute; Call Hold; Call Waiting - TIPTEL IP 284 Manual

Enterprise IP Phone
7) Press the Save soft key to save your changes.

During an Active Call

Mute

This function allows you to mute the microphone of the active audio device during a call;
you can not be heard by the other party. You can still hear all other parties while mute
is enabled. When you press the MUTE button all of the conversation will be muted.
To mute/resume the conversation:
Press MUTE button during a conversation to mute the calls, the icon
the LCD. Press it again to get the microphone return to normal conversation.

Call Hold

This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1) Press the HOLD button or Hold hot key to put your active call on hold.
2) If there is only one call on hold, press the Resume hot key or Hold button to retrieve
the call.
3) If there are more than one call on hold, press the line keys to switch the current
account (The on hold calls are under different lines), or the Up/Down button to
highlight the call (The on hold calls are under the same lines), then press the
Resume hot key or Hold button to retrieve the call.
Note:
When you are under the call hold status, putting down the handset, the conversation
will go on over the speaker instead of hanging up the call.

Call Waiting

This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via Phone interface:
1) Press Menu->Features->Call Waiting hot keys.
2) Use the navigation keys or Disable/Enable hot key to active/inactive call waiting.
Using the Basic Call Functions
- 58 -
will be shown on