Transfer Calls; Enquiry Call; Transfer Call - TIPTEL 3130 User Manual

Transfer calls

There are two possibilities to transfer a call: With and without enquiry.

Enquiry call

During a call, you are able to make an enquiry call to another party.

During the active call, press the "Enquiry" softkey.

Now use the digit keys, a function key assigned the "Speed dial" or "Busy
lamps" function, or the phone book, to select the required number.

Hold the enquiry call.
If the enquiry call party hangs up, press the "Disconnect" softkey or put down the
receiver - the connection on hold is displayed again. To re-activate the call on hold
after the enquiry call, press the "Continue" softkey, press the R key or lift up the
receiver.
Note: Transferring can be set up in the web configuration by putting down
the receiver. If this is the case, the call is transferred by putting down
the receiver during the enquiry call.

Transfer call

For a direct transfer of a call without an enquiry press the "Transfer" softkey.
Now use the digit keys, a function key assigned the "Speed dial" or "Busy lamps"
function, or the phone book, to select the required number. Pressing the softkey
"OK" or the hash button (#) transfers the call.
Transfer calls
31