Connecting The Base Station; Setting Up The Handset For Use - Siemens Gigaset S430 User Manual

Setting up the telephone for use

Connecting the base station

¤
First connect the mains unit and then
the phone jack as shown below and
place the cable in the cable channels.
1
1
1
1
1 Underside of base station (enlarged view)
2 Mains adapter 230 V
3 Phone jack with phone cord
Please note:
u
The mains adapter must be always
connected, as the phone will not oper-
ate without mains connection.
u
If you buy another phone cable, ensure
that it has the correct phone jack
assignment:
Correct phone jack assignment
3
2
1
6
2
3
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused

Setting up the handset for use

Inserting batteries
Caution:
Use only the rechargeable batteries recom-
mended by Siemens on page 44! Never use
conventional batteries (non-rechargeable) or
other battery types as this may cause signifi-
cant damage to health and property. For
example, the outer casing of the batteries
could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
¤
Fit the batteries with the correct polar-
ity (see diagram).
The polarity is indicated in/on the battery
compartment.
Closing the battery cover
¤
Position the cover pointing slightly
downwards and push it up until it clicks
into position.
Opening the battery cover
¤
Press below the upper curve on the bat-
tery cover and slide down.