Introduction; Introduction; Serial Port Setup - Digital Projection M-Vision Cine 320 Series Installation And Quick Start Manual

Digital Projection
M-Vision Cine 320 Series

Introduction

The projector can be controlled by using an external control system or a PC via an RS232 interface, using a terminal-emulation program,
such as HyperTerminal.

Serial Port setup

•
Baud rate 38,400 bps
•
Data length 8 bits
•
Stop bits one
•
Parity none
•
Flow control none
Rev D July 2014

INTRODUCTION

Remote Communications Guide
Notes
See how to connect to the projector
using the RS232 input in the
Connection Guide.
51