2N Helios IP Force Installation Manual page 17

Flush mounting – plasterboard wall
What You Need:
Plasterboard flush mounting box, Part No.
9151002
Wall mounting (concrete and steel
structures, entry barrier columns, etc.)
What You Need:
®
Just your 2N Helios IP Force unit (the
covering frame is not applied)
Caution
The warranty does not apply to the product defects and failures arisen as

a result of
manufacturer is neither liable for damages caused by theft within an area
that is accessible after the attached electric lock is switched. The product
is not designed as a burglar protection device except when used in
combination with a standard lock, which has the security function.
When the proper mounting instructions are not met, water might get in

and destroy the electronics. It is because the intercom circuits are under
continuous voltage and water infiltration causes an electro-chemical
reaction. The manufacturer‟s warranty shall be void for products damaged
in this way!
Mechanical Installation
improper mounting (in contradiction herewith).
2.2
The
17