Technical Parameters - 2N Helios IP Force Installation Manual

Door access intercom
Hide thumbs Also See for Helios IP Force:
Table of Contents

Advertisement

4.1 Technical Parameters

Signalling protocol
Buttons
Button design
Count of buttons
Numerical keypad
Audio
Microphone
Amplifier
Loudspeaker
Volume control
Full duplex
Audio stream
Protocols
Codecs
Camera
Sensor
Resolution
Picture frequency
Sensitivity
Viewing angle
Infrared illumination
Video stream
Protocols
Codecs
IP camera function
Interface
Power supply
PoE
LAN
Recommended cabling
Passive switch
Active switch output
RFID card reader
SIP (UDP)
Transparent, white backlit buttons with easily
replaceable name tags
1, 2 or 4
optional
2 integrated microphones
10W (class D)
1W (optionally 10W)
Adjustable with automatic adaptive mode
Yes (AEC)
RTP/RTSP
G.711, G.729
1/4'' colour CMOS
640 (H) x 480 (V)
Up to 30 snaps/s
1.9 V/lux-sec (550nm)
135° (H), 109° (V)
Yes
RTP/RTSP/HTTP
H.263+, H.264, MPEG-4, M-JPEG
Yes
12V+-15%/1A DC or PoE
PoE 802.3af (Class 0 - 12.95W)
10/100BASE-TX s Auto-MDIX, RJ-45
Cat-5e or higher
NO and NC contacts, up to 30V/1A AC/DC
12V/700mA DC
optional
39

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Helios IP Force and is the answer not in the manual?

Table of Contents