Leica M Instruction Manual page 219

4. Confirm your settings - only possible if the eighth character is
active - by pressing the SET
• A further sub-menu appears, showing
5. Select or .
Yes No
The X characters are placeholders.
1
or INFO button.
Reset image numbering?
ChANgINg pICTURE FILE NAMES
1. In the main menu (see p. 154/246) select
.
(page 4 / section), and
SETUP
2. Select
Change file name
• The name of the picture file appears. The first character is
marked as ready for editing.
Positions 1-4 can be changed.
3. The numbers and letters are changed by turning the setting dial
(29) or by pressing up and down on the direction pad (30), while
you select different positions by pressing
– the button (31),
INFO
– or the button (20),
SET
– or left / right on the direction pad.
The available characters are upper case letters from
numbers from to
0
through them in an endless loop.
4. Confirm your settings - only possible if the fourth character is
active - by pressing the
• The setting menu described under 2. appears again.
217
Image numbering
in the sub-menu.
and the underscore , and you can scroll
9 _
or button.
SET INFO
to ,
A Z