Leica M Instruction Manual page 189

Notes:
• If the bracketing exceeds the range of ±3EV - due to the
combination of the number of pictures and graduation - the scale
division changes from ±3EV to ±6EV. The intervals and triangles
displayed adjust accordingly.
• Note that both settings have to be made and confirmed, otherwise
the function will not be active.
5. Confirm the setting.
• The setting for
Automatic
6. Select the desired setting,
when the shutter is released once,
individually for each picture.
7. Confirm the setting.
• Set bracketing is indicated by
8. Pressing the shutter release button once or several times (see p.
150) produces all pictures.
Example, first " " stands for the graduation, the second for the number of pictures
1
X
is marked as ready for editing.
to start bracketing automatically
On
to release the shutter
Off
/ in the initial menu list.
XEV X
1
Notes:
• The following rule applies when using automatic bracketing:
The sensitivity determined automatically by the camera for the
uncorrected picture is also used for all other pictures in a series,
i.e. this ISO value is not changed during bracketing.
This may mean that the slowest shutter speed specified under
Set maximum exposure time
• Depending on the initial shutter speed, the working range for
automatic bracketing may be limited.
• Regardless of this, the specified number of pictures are always
taken, which may mean that several pictures in a series have the
same exposure.
• Automatic bracketing is also possible when using flash. This is
irrespective of the flash unit's charge state, therefore the exposure
series may contain shots both with and without flash illumination.
• The function itself remains active until it is deactivated in the
Pictures sub-menu. If it is not deactivated, another series of
pictures is taken each time the shutter release button is pressed.
187
is exceeded.