Leica M Instruction Manual page 211

Review with clipping indicators
You can use the menu to set the clipping thresholds for displaying
both the light and dark areas.
Press the INFO button twice (starting from normal review mode), to
display the areas without marking.
• Excessively light areas are indicated in red, excessively dark areas
in blue, flashing in each case. The clipping symbol ( ) also appears
in the bottom right.
Setting the function
1. In the main menu (see p. 154/246) select
(page 3 / section), and
SETUP
2. Set the upper and lower thresholds in the sub-menu.
• The scale shows the clipping areas relative to the overall
exposure range.
The following then appears in the pictures:
• Excessively dark areas are marked in blue, excessive bright areas
in red, flashing in each case.
Notes:
• The clipping indicators are available when viewing both the entire
picture and a section of it, but not when simultaneously viewing 4,
9 or 36 reduced pictures (see p. 211).
• The clipping indicators always relate to the section of the picture
currently displayed (see p. 211).
209
Clipping setting