Installing The Cisco 860, 880, 890 Isr - Cisco 800 Series Hardware Installation Manual

Installing the Cisco 860, 880, 890 ISR

Note
Installing the Cisco 860, 880, 890 ISR
This section describes the equipment and the procedures for successfully installing the Cisco 860 series,
880 series, and 890 series ISRs, and contains the following sections:
•
•
•
•
•
•
For compliance and safety information, see the Regulatory Compliance and Safety Information
Note
Roadmap that ships with the router and the
Series Routers.
All wireless LAN products in the 5.2/5.3GHz band cannot be used outdoors. Use the product only
Warning
indoors. Statement 372
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning Do not locate the antenna near overhead power lines or other electric light or power circuits, or
where it can come into contact with such circuits. When installing the antenna, take extreme care
not to come into contact with such circuits, because they may cause serious injury or death. For
proper installation and grounding of the antenna, please refer to national and local codes (for
example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code,
Section 54). Statement 1052
Warning No user-serviceable parts inside. Do not open. Statement 1073
Cisco Integrated Services Router Hardware Installation Guide
2-38
The DC supply is IP 41 compliant in all six orthogonal directions. The mounting orientation will
not affect IP 41 compliance.
Equipment, Tools, and Connections, page 2-39
Installing the Cisco 860, 880, and 890 Series Routers, page 2-40
Installing the C881G-B/S/V-K9 ISR, page 2-54
Installing the C881GW-S/V-A-K9 ISR, page 2-54
Installing the C881G-U-K9 ISR, page 2-54
Installing the Cisco 880G for 3.7G (HSPA+)/3.5G (HSPA) ISRs, page 2-56
Regulatory Compliance and Safety Information for Cisco 800
Chapter 2 Installing the Router