Cisco 800 Series Hardware Installation Manual page 113

Chapter 1 Product Overview
Table 1-37
Table 1-37
Number LED
1
2
3
4
5
6
7
describes the LEDs for the Cisco C899G-LTE ISR.
LED Descriptions for the Cisco C899G-LTE ISR
Color
Power OK Green
PoE Green
Amber
GE LAN PoE Green
Ports
GE LAN Ports Green
GE WAN Green
Ports
SFP WAN port Green
VPN Green
PPP Green
Description
On—DC power is being supplied to the router and the
Cisco IOS software is running.
Blinking—Boot up is in process, or the router is in
ROMMON mode.
Off—Power is not supplied to the router.
On—PoE is connected and powered.
Off—PoE is not installed.
On—Fault with the PoE.
Green On—Ethernet port is connected.
Amber On—Fault with PoE. There is a fault with the
in-line power supply.
Green/Amber Blinking—Data is either being received or
transmitted.
Green/Amber Off—Ethernet port is not connected.
On—Ethernet port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Ethernet port is not connected.
On—Port is connected.
Blinking—Data is either being received or transmitted.
Off—Port is not connected.
On—Port is connected.
Blinking—Data is either being received or being
transmitted.
Off—No link
On—VPN is connected.
On—At least one PPP session is established.
Cisco Integrated Services Router Hardware Installation Guide
Cisco 860, 880, 890 Series
1-93