Cisco 890 Series Integrated Service Routers - Cisco 800 Series Hardware Installation Manual

Chapter 1 Product Overview

Cisco 890 Series Integrated Service Routers

This sections contains the following topics:
•
•
Cisco 891, Cisco 892, and Cisco 892F
The Cisco 891, Cisco 892, and Cisco 892F ISRs have the following features:
•
•
•
•
•
Note
•
•
•
•
•
The following feature is located on the front panel of
•
Cisco 891, Cisco 892, and Cisco 892F, page 1-97
Cisco C897VAB-K9, page 1-107
Integrated 8-port 10/100 Ethernet switch for connecting to the LAN
10/100 FE and 10/100/1000 Gigabit Ethernet (GE) port for connecting to the WAN
Separate console and auxiliary ports
(Optional) embedded Wi-Fi certified dual-radio 802.11a/b/g/n-compliant wireless AP
Optional 4-port PoE
The Cisco 890 Series ISRs can include an optional PoE module that provides power to
802.3af-compliant devices connected to Ethernet ports 0 through 3. If this feature was not
configured with the factory order, you must order and install it to enable the PoE function.
Security feature card (SFC) socket
DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB
system memory in Cisco 891 and Cisco 892 ISRs, and a total of 1 GB system memory in
Cisco 892F series ISRs
Three reverse-polarity Threaded Neill-Concelman (RP-TNC) connectors on the back panel for
non-captive dual-band WLAN antenna (wireless models only)
Support for the AIM2-CUE-K9 and AIM2-APPRE-104-K9
GE small-form-factor pluggable (SFP) port (Cisco 892F series ISRs only)
Two USB 2.0 ports
Cisco Integrated Services Router Hardware Installation Guide
Cisco 860, 880, 890 Series
1-97