C881G-B/S/V-K9 Isrs; C881Gw-S/V-A-K9 Isrs - Cisco 800 Series Hardware Installation Manual

Cisco 860, 880, 890 Series
Figure 1-31
Figure 1-31
1
2
3
4
5

C881G-B/S/V-K9 ISRs

The C881G-B-K9, C881G-S-K9, and C881G-V-K9 ISRs are members of the Cisco 880 series data
routers. These routers provide integrated Virtual Private Network (VPN), 802.11b/g/n-compliant
wireless Access Point (AP), 3G, and backup capabilities.
For information on configuring Cisco 880 Series ISRs, see
Software Configuration

C881GW-S/V-A-K9 ISRs

The C881GW-S-A-K9 and C881GW-V-A-K9 ISRs are members of the Cisco 880G series data routers.
These routers provide integrated VPN, embedded Wi-Fi CERTIFIED™, 802.11b/g/n-compliant wireless
AP, 3G, and backup capabilities.
For information on configuring Cisco 880 Series ISRs, see
Software Configuration
Cisco Integrated Services Router Hardware Installation Guide
1-56
shows the back panel details of the C881WD-A-K9 and C881WD-E-K9 ISRs.
Back Panel of the C881WD-A-K9 and C881WD-E-K9 ISRs
FE WAN
0
4
1 2
Primary WAN port—10/100 FE
USB port
4-port 10/100 Ethernet switch
Serial port—console or auxiliary
No separate PoE power supply is
Note
required for routers with embedded
WLAN antennas. For information on
system power supply requirements
when PoE is enabled, see the
over Ethernet Module" section on
page 1-126.
Guide.
Guide.
Cisco 881WD
FE LAN
3 2 1 0
3
6 Reset button
7 Power connector
8
Kensington security slot
9
Power switch
"Power
Cisco 880 Series Integrated Services Router
Cisco 880 Series Integrated Services Router
Chapter 1 Product Overview
9
O
CONSOLE
POE OPTION
REQUIRES 5A
POWER
ADAPTOR
RESET
AUX 12VDC 5A
4 5 6 7 8