Installing The Cisco 819 Isr - Cisco 800 Series Hardware Installation Manual

Chapter 2 Installing the Router
Figure 2-17
Connect the ring lug to the router grounding point and reinstall the same 6-32 screw.
Step 7

Installing the Cisco 819 ISR

This section describes the equipment and the procedures for successfully installing the Cisco 819 ISR
and contains the following sections:
•
•
•
Note For compliance and safety information, see the Regulatory Compliance and Safety Information
Roadmap that ships with the router and the
Series
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Connecting the Ring Lug onto the Grounding Point
1
6-32 ground screw
2
Ground wire
Equipment, Tools, and Connections, page 2-20
Installing the Router, page 2-22
Mounting the DC Power Supply, page 2-37
Routers.
1 2
Regulatory Compliance and Safety Information for Cisco 800
Cisco Integrated Services Router Hardware Installation Guide
Installing the Cisco 810 ISR
2-19