Shutting Down; Resume Function; Setting The Date And Time - Tascam DR-40 Reference Manual

3 – Preparation
Date/time adjustment may be skipped by pressing the
ENTER/MARK button, and made later. (See "Setting the date
and time" on page 28.)

Shutting down

Press and hold the (HOME) [8] button until
appears on the display.
PCM RECORDER
The power turns off after the unit completes its shutdown
process.
CAUTION
(HOME) [8] button to shutdown the
Always use the
unit.
Do not remove the batteries or disconnect the power cable
(AC adaptor TASCAM PS-P515U or USB cable) accidently while
the unit is operating. If you do so, the unit cannot shut down
properly and all recordings, settings and other data will be
lost. Lost data cannot be restored.
28
TASCAM DR-40

Resume function

The unit has resume function. When started up, the unit is
located to the position (time) where it left off when shut down
previously.
If the Playback button is pressed after start-up, the file the unit
was playing when shut down previously starts to be played
LINEAR
from the position (time) where the unit left off when shut
down.
NOTE
The required data are stored in the SD card. The resume
function does not work if the card is exchanged or formatted.

Setting the date and time

Using its internal clock, this unit remembers the date and time
when a file is recorded.
1 Press the MENU button to open the
2 Use the + or – button to select the
(highlighted), and press the ENTER/MARK or /
button.
screen.
MENU
menu item
OTHERS