Shutting Down - Tascam DP-24SD Owner's Manual

2 - Quick Guide
Normalizing
8
Normalizing maximizes the volume of the master file.
1. When Recorder mode is
Mastering
( ) button to open the
NORM
2. Press the F2 (
) button to perform the normalization.
YES
3. Once the process is completed, the display returns to the
Mastering screen.
Re-recording the master file
8
Re-record the master file with equalization and compression
applied to create a new master file.
1. When Recorder mode is
Mastering
RECORD (0) button.
2. This will record over the master file and create a new master
file with equalization and compression applied.
18
TASCAM DP-24SD
mode, press the F4
screen.
NORMALIZE
mode, press the

Shutting down

Turn the unit off when you are done using it.
1. Press the HOME button to open the Home screen.
2. Press and hold the STANDBY/ON button on the rear panel
until appears on the display.
PORTASTUDIO
When the unit completes its automatic shutdown
procedure, which includes recording various information
about the operations that have been performed until now,
the power turns off (standby).
Always use the procedure above to turn the power off
properly.
CAUTION
When the power is on, do not cut the power to the unit by,
for example disconnecting the power cord. All settings made
since the last time you saved will not be saved. If you cut the
power while an SD card is being accessed, all recorded songs
and data may be damaged and cannot be recovered.