Setting The Format Of File Names; File Name Format - Tascam DR-40 Reference Manual

the "dr-1.sys" file that is necessary to use the SD card with the
DR-40.
1 Use the + or − button to select
the ENTER/MARK or / button to highlight
2 Press the ENTER/MARK button to open a pop-up
confirmation window.
3 Press the ENTER/MARK button to execute the full
formatting, or press the
cancel formatting.
CAUTION
When formatting a card, the unit should be operating on
AC power supplied through the PS-P515U adapter (sold
separately), USB bus power supplied from a computer, or
batteries with sufficient remaining power. If the power fails
during formatting, the formatting may not occur correctly.
NOTE
This function cannot be used with SDXC cards. Use the QUICK
FORMAT function. (See "Using QUICK FORMAT" on page 100.)
, and press
FULL FORMAT
.
Exec
(HOME) [8] button to
12 – Settings and Information

Setting the format of file names

You can select the format of names given to files recorded by
this unit.
1 Press the MENU button to open the
2 Use the + or − button to select
ENTER/MARK or / button to open the
submenu.
3 Use the + or − button to select
ENTER/MARK or / button.
screen appears.
FILE NAME
Use the . or / button and the + or − button to set each
item.
On this screen you can make the following settings for each
item.

File name format

The item can be set to either
TYPE
.
DATE
screen.
MENU
, and press the
OTHERS
OTHERS
, and press the
FILE NAME
(default setting) or
WORD
101
TASCAM DR-40