Select The File You Want To Overdub - Tascam DR-40 Reference Manual

4 – Recording
4 Press the . button to return to setting item
selection.
5 Use the + and – buttons to select
the ENTER/MARK or / button.
6 Use the + and – buttons to set the overdubbing mode.
DUB MODE Explanation
The playback signals of the files on channels
1/2 and 3/4 and the input signals are mixed and
MIX
recorded as a new file.
The playback file will not be overwritten.
The file on channels 1/2 is played back and a new
SEPARATE file is recorded on channels 3/4.
(default The playback signals of channels 1/2 are not
value) recorded.
The playback file will not be overwritten.
NOTE
• When a file is recorded using
signal is not included in the recording.
• Since a recording made in
include the playback signal, you can record again with the
same playback file as many times as you want. You can then
listen to and select the best one from multiple recordings
afterward.
52
TASCAM DR-40
, and press
DUB MODE
mode, the playback
SEPARATE
mode does not
SEPARATE
7 Press the . button to return to setting item
selection.
8 Use the + and – buttons to select
ENTER/MARK or / button.
9 Use the + and – buttons to set the input source.
SOURCE Explanation
INT MIC Record using built-in mics.
(default value)
EXT IN 1 Record using external inputs.
When creating a stereo file, the same sound is
added to both L/R channels.
EXT IN 1/2 Record using external inputs.
When creating a mono recording, the
channel is recorded.
10 Press the . button to return to setting item
selection.
11 When setting is complete, press the
button to return to the Home Screen.

Select the file you want to overdub

Use the . and / buttons and the
select that files that you want to overdub.
, and press the
SOURCE
L
(HOME) [8]
screen to
BROWSE