Starting 3/4-Channel Recording; File Names When Recording In 4-Channel - Tascam DR-40 Reference Manual

4 – Recording
8 Use the + and − buttons to set the DELAY time for the
EXT L channel.
Range: -
-150ms (51m)
9 Press the . button to highlight the item.
10 Use the + and − buttons to select the EXT R DLY item
and press the ENTRY/MARK or / button.
11 Use the + and − buttons to set the DELAY time for the
EXT R channel.
12 Press the . button to highlight the item.
13 When using a mid-side mic, use the + and − buttons to
select the MS DECODE item and press the ENTRY/MARK
or / button.
Use the + or − button to turn the MS DECODE item on.
14 When setting is complete, press the
button to return to the Home Screen.
50
TASCAM DR-40
(default) -
0ms (0m) +150ms (51m)
(HOME) [8]

Starting 3/4-channel recording

1 Press the RECORD [0] button to begin recording
standby.
NOTE
Before you start recording you can confirm the recording
audio file format and sampling frequency at the top of the
recording screen, as well as the input sources on the left and
the recording project name beneath the meter bars.
2 Press the RECORD [0] button again to start recording.

File names when recording in 4-channel

4-channel recording creates two files simultaneously.
Two files – one for the built-in mics (channels 1/2) and one for
the external mics or equipment (channels 3/4) – are created as
a set.