Using The Auto Tone Function; Setting The Auto Tone Function - Tascam DR-40 Reference Manual

4 – Recording

Using the AUTO TONE function

The AUTO TONE function can be used to automatically insert a
tone signal whenever recording starts and stops.
Connect the /LINE OUT jack on the left side of the unit
to the external mic input jack of a video camera or digital
camera capable of recording video. Then, use the AUTO TONE
function to allow both units to record the same tone signals,
which can be used to synchronize their files in video editing
software.
External mic input jack
60
TASCAM DR-40
Digital SLR camera

Setting the AUTO TONE function

1 Press the MENU button to open the MENU screen.
2 Use the + and − buttons to select the REC SETTING
menu and press the ENTER/MARK or / button to
open the REC SETTING screen.
3 Use the + and − buttons to select the AUTO TONE item
and press the ENTER/MARK or / button.
4 Use the + and − buttons to set when tone signals are
inserted.
Options: OFF (default), HEAD (recording start only),
HEAD+TAIL (recording start and stop)
5 After completing the setting, press the
button to return to the Home Screen.
NOTE
The icon appears on the recording screen when the auto
tone function is on.
(HOME)[8]