Shutting Down; Turning Off Automatically; Installing A Microsd Card; Handling Microsd Cards - Tascam DR-10X Owner's Manual

Shutting down

When the unit is on, slide the ¤?o — 0REC
switch toward ¤ and hold it for about one second
until the display becomes unlit and the unit turns off.
CAUTION
Always use the ¤?o — 0REC switch to
turn the unit off.
When the unit is on, do not remove the battery
or disconnect the USB cable if using USB bus
power. Doing so will cause all recordings,
settings and other data to be lost. Lost data
and settings cannot be restored.

Turning off automatically

When operating on battery power and the
item on the Menu Screen is set to ON, if
PWR SAVE
the unit is stopped and no operation has occurred
for about 10 minutes, the unit will turn itself off
automatically.
NOTE
When the unit is turned on for the first time (or
when the built-in clock is reset after being left
unused without a battery), the Menu Screen
item appears after the start-up
DATE/ TIME
screen to allow the date and time to be set.
For details about how to set it, see the
item in "Menu structure" on page 16.
TIME
12
TASCAM DR-10X

Installing a microSD card

Open the microSD card slot cover on the left side.
•
Inserting the microSD card
Insert the microSD Card into the slot in the
direction of the arrow as shown in the following
illustration until it clicks into place.
•
Removing the microSD card
Press the microSD card in gently and then release
it to allow it to come out.
AUTO
CAUTION
In order to use a microSD card in this unit,
you must format it first. (See "Making menu
settings" on page 15.)
• After formatting a microSD card, the display
will show the following when the unit is
turned on.
DATE/
• If no microSD card has been inserted, the
display will show the following when the unit
is turned on.
See the following section for information
about handling microSD cards.

Handling microSD cards

Precautions when handling
microSD cards
This unit uses microSD/microSDHC cards for
recording and playback.
It supports microSD cards that are 64 MB – 2 GB and
microSDHC cards that are 4 GB – 32 GB.
A list of microSD cards that have been confirmed for
use with this unit can be found on the TEAC Global
Site (http://teac-global.com/). microSD/microSDHC
cards are delicate media. In order to avoid damaging
a card or the card slot, please take the following
precautions when handling them.
•
Do not leave them in extremely hot or cold
places.
•
Do not leave them in extremely humid places,
and do not let them become wet.
•
Do not put things on top of them or twist them.
•
Do not hit them.
•
Do not remove or insert a card during data
transmission or other access.