Recording The Moment Before Pushing Record (Pre Rec) - Tascam DR-40 Reference Manual

NOTE
can be set when recording/in recording standby.
LOW CUT
TIP
Use the built-in effects of this unit as necessary on the input
source. (See "8 – Using the Effects" on page 88.)
Recording the moment before pushing
RECORD (PRE REC)
By using prerecording, when the unit is in recording standby
you can record up to two seconds of the signal input before
the RECORD [0] button is pushed to start recording.
1 Press the MENU button to open the
2 Use the + or − button to select
the ENTER/MARK or / button.
3 Use the + or − button to select
ENTER/MARK or / button.
4 Use the + or − button to select
(Default: )
OFF
screen.
MENU
, and press
REC SETTING
, and press the
PRE REC
.
ON
5 Press the (HOME) [8] button to return to the
Home Screen.
TIP
By using this in combination with the AUTO REC function, you
can record events without losing the beginnings of sounds.
NOTE
• If the amount of time in record standby is less than two
seconds, the sound for that amount of time is recorded.
• The prerecording function is disabled in OVERDUB mode.
4 – Recording
59
TASCAM DR-40