Mark Function; Adding Marks Manually To A Recording - Tascam DR-40 Reference Manual

2 Use the + and − buttons to select the REC SETTING item
and press the ENTRY/MARK or / button.
The REC SETTING screen opens.
3 Use the + and − buttons to select the TRACK INC item
and press the ENTRY/MARK or / button.
Use the + and − buttons to set the automatic track time.
Options: OFF (default), 5min, 10min, 15min, 30min, 60min
4. After completing the setting, press the
button to return to the Home Screen.
CAUTION
A new file cannot be created if the total number of folders and
files would exceed 5000.
NOTE
If the recording time is 24 hours or more, this will be displayed
as 23:59:59.

Mark function

Adding marks manually to a recording

You can manually add marks to a recording where you want
them.
Press the ENTER/MARK button while recording to add a
mark.
Mark number pull-up appears.
(HOME) [8]
NOTE
• Mark information is stored in the file with numbers between
01–99. The maximum number of marks in a file is 99.
• As the unit is compatible with the BWF format for WAV files,
marks added to a WAV file during recording are stored in the
file. Marks stored in the file are available when playing back
the file using a BWF compliant software, etc.
• When using the built-in mics, the sound of pressing the
button when adding a mark could be recorded. To avoid
this, use a remote control to add marks.
4 – Recording
57
TASCAM DR-40