Using The Effects; Setting The Effect - Tascam DR-40 Reference Manual

8 – Using the Effects
The DR-40 has built-in effects that can be applied to the input
signal during recording and practice. They can also be applied
to the output signal during playback.
The icon appears as light letters on a dark background.

Setting the effect

1 Press the MENU button to open the
2 Use the + or − button to select
ENTER/MARK or / button to open the
submenu.
3 Use the + or – button to select
ENTER/MARK or / button.
The screen appears.
EFFECT
As shown in the above illustration, there are four setting
items on the screen.
EFFECT
88
TASCAM DR-40
E ects ON indication
screen.
MENU
, and press the
OTHERS
OTHERS
, and press the
EFFECT
Set each item using the . or / buttons or + or –
buttons.
EFFECT:
Use this to turn the effect on or off.
The default setting is .
OFF
PRESET:
Select the preset for the effect being used. (default:
See the "Effects Preset List" on page 89 for details about
the preset effects.
LEVEL:
Use this to change the output level of the preset effect
selected in the item.
PRESET
Setting range: - (default:
0 20
SOURCE:
You can choose one of the following as the sound that the
effect is applied to (default value:
SOURCE Explanation
MIX (default Apply the effect to the output of an overdubbed
value) recording or a mixed down recording
INT MIC ST Apply the effect to signals input through the
built-in mics
EXT IN 1/2 Apply the effect to signals input through
external mics or equipment
HALL 1
)
10
).
MIX
)