Inserting And Removing Sd Cards; Inserting The Sd Card - Tascam DR-40 Reference Manual

The screen is displayed.
OTHERS
3 Use the + or – button to select the
item, and press the ENTER/MARK or / button.
The screen is displayed.
DATE/TIME
4 Press the . or / button to move the cursor
(highlighted area), and use the + or – button to change
values.
5 Press the ENTER/MARK button to confirm the change
and return to the
OTHERS
menu
DATE/TIME
screen.
NOTE
You can set the unit to automatically add the date to file names.
(See "File name format" on page 101.)
CAUTION
The date and time setting can only be maintained for a few
minutes if the unit is not powered from batteries or through
the AC adaptor TASCAM PS-P515U or the USB cable. When
using batteries, replace them before they completely lose
power.

Inserting and removing SD cards

Inserting the SD card

NOTE
• An SD card is already installed when the unit is shipped
from the factory. If you want to use this card to record and
play tracks, there is no need to reinstall it.
• SD cards that meet SD, SDHC or SDXC standards can be
used with this unit.
• A list of SD cards that have been confirmed to work with
this unit can be found on our website (http://tascam.com/).
1 Open the SD slot cover on the right side panel.
3 – Preparation
29
TASCAM DR-40