Preparation; Powering The Unit; Starting Up The Unit; Setting The Built-In Clock - Tascam DR-60D mkII Owner's Manual

Track status display
9
This icon changes according to the recording
mode.
Indicators
Meaning
(examples)
Playing a file recorded in MONO
or STEREO mode
/ /
Monitoring in MONO mode
/
/ Monitoring in STEREO mode
Playing a file recorded in DUAL
MONO or DUAL ST mode or
/
monitoring in these modes
Playing a file recorded in 4CH
mode or monitoring in this
mode
Playback position display
0
The current playback position is shown by a bar.
File name
q
This shows the name of the file playing back
unless there are multiple files recorded in
4-channel recording mode or dual recording
mode.
Remaining time
w
This shows the elapsed time (hours: minutes:
seconds) of the current file.
Level align status
e
: Level align function off
: Level align function on
r Playback equalizer status
: Playback equalizer off
: Playback equalizer on
Peak value in decibels (dB)
t
The maximum level that occurs in a fixed period
of time is displayed digitally.

Preparation

Powering the unit

8 Using AA batteries
Remove the battery compartment cover on the
1.
back of the unit.
Install 4 AA batteries with their ¥ and ^
2.
marks as shown in the battery compartment .
Close the battery compartment cover.
3.
•
Use the item of the
BATTERY TYPE
menu to set the type of battery in order to
accurately show the amount of power remaining
and allow the unit to accurately determine
whether enough power is available for proper
operation. (By default, this is set to
alkaline batteries.)

Starting up the unit

To start up the unit from the stopped state, press and
hold the button until "TASCAM DR-60DMKII"
(start-up screen) is displayed on the display.
The Home Screen appears when the unit starts up.

Setting the built-in clock

When the unit is started up for the first time (or when
the built-in clock is reset after being left unused
without batteries), the
before the start-up screen to allow the date and time
to be set.
Shutting down (putting the unit
in standby)
Press and hold the
RECORDER" appears on the display.
The power turns off after the unit completes its
shutdown (standby) process.
SYSTEM
for
ALKAL
screen appears
DATE/ TIME
button until "LINEAR PCM
11
TASCAM DR-60DMKII