POWERING & SETUP
•
Check the HOLD switch is not engaged.
•
Press and hold the POWER/HOME button.
•
RESET to DEFAULT settings by pressing
MENU > SYSTEM > INITIALIZE > EXEC
•
Insert headphones into
CONFIGURING RECORD SETTINGS
•
The recommended recording format is:
WAV 24bit / 48khz
•
Press MENU > REC SETTINGS and choose:
FORMAT = WAV 24bit
SAMPLE = 48k
PRE-RECORD & RECORD
•
Press RECORD once to initiate 'PRE-RECORD'
(indicated by flashing LED)
•
In PRE-RECORD mode, press:
QUICK > LEVEL MODE > AUTO then press
ENTER to confirm.
•
Press RECORD again to begin recording.
TOP TIPS!
•
Make sure you are monitoring your audio with
headphones.
•
Use the supplied windshield if outside.
•
Remember, PRE-RECORD mode is not recording.
•
Whilst RECORDING, you can press RECORD again
to pause.
TRANSFERRING FILES
•
Open the rubber flap on the side and gently push
the SD card to eject.
•
Insert the SD card into a computer and transfer
files.
•
To
DELETE ALL
DATA, re-insert SD CARD into
recorder and navigate to:
MENU > SYSTEM > QUICK FORMAT > EXEC
TASCAM DR-40X
Portable Four-Track Digital Audio Recorder & USB Interface
to monitor sound.
Q U I C K S T A R T G U I D E
CREATIVE
MEDIA
Need help?
Do you have a question about the DR-40X and is the answer not in the manual?
Questions and answers