Shutting Down - Tascam Digital Portastudio DP-03SD Owner's Manual

2 – Quick Start Guides
Press the F1 (BACK) button to return to the Home screen.
5
Á
6 Press the PLAY ( ) button to listen to the stereo master
track with compression.
NOTE
If the EQ item is also ON, the effect of the equalizer on the
sound will also be heard.
ª Normalizing the stereo master track
Normalizing maximizes the volume of the stereo master track.
1 In mastering mode, press the F3 (NORM) button to open the
NORMALIZE screen.
Press the F4 (EXEC) button to normalize the track.
2
Press the F1 (BACK) button to return to the Home screen.
3
ª Rerecord the stereo master track
Record the master track with equalization and compression
applied to create a new stereo master track.
In mastering mode, press and hold the RECORD (
1
Á
and press the PLAY ( ) button.
2 This will record over the master and create a new stereo
master track with equalization and compression applied.
18
TASCAM DP-03SD

Shutting down

Turn the unit off when you are done using it.
Press the HOME button to open the Home Screen.
1
Press and hold the STANDBY/ON button on the rear panel
2
until PORTASTUDIO appears on the display.
When the unit completes its automatic shutdown
procedures, which includes recording various information
about the operations that have been conducted until now,
the power turns OFF (standby).
Always use the procedures above to turn the power off
properly.
º
) button
CAUTION
If you cut the power to the unit by disconnecting the power
cord, for example, all recorded data and settings made since
the last time the unit was shut down or a song was saved will
be lost. These lost data and settings cannot be recovered.