System Setting; Usb - Strong SRT 8110 User Manual

PART 1 • English
oSD language
Select the preferred language of On Screen Display.
Subtitle language
Select the preferred subtitle language.
Audio language
Select the preferred audio language for watching TV channels.
If the language is not available, the default programme language will be used
Digital Audio
Select digital audio output mode
PCM – audio from any format will be converted to PCM format
RAW – audio from receiver will be send in original format
OFF – digital audio output disabled

5.6 System Setting

Press MEnU and select System. The menu provides options to adjust the system settings.
Press pq to select an option and press tu to adjust the setting. Press EXIT to exit the menu.
Parental guidance
You can restrict access to programs that are unsuitable for children below the set age. To restrict/lock the channel you
will need to enter either the default password '8888' or your own password. This function depends from broadcaster. It
will work only if broadcaster assigns morality levels to the programs according to standards.
Set Password
Set or change the password for locked programs and menu access. Enter your old password or the default password
'8888'. You will then be asked to enter your new password. To confirm re-enter your new password. Once it is confirmed,
press EXIT to exit the menu.
Restore factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select Restore Factory Default and press oK or u to select. Enter your password or the default password
'8888' and press oK to confirm. This option will delete all preset channels and settings. The receiver will reboots and
start with Installation Guide menu.
Information
View model, hardware and software information.
Software update
If the status is set ON, it will scan new software from broadcast according to your preferred time in Start time.
Software update from USb
Download the required update file for your receiver model from our website http://www.strong.tv support page or
contact to your local dealer.
Unzip file, if necessary, and copy it to root folder of your USB storage device.
Connect USB storage device to the USB port of the receiver. Enter to the main Menu, select USB. Select Multimedia –
Music and press oK. In the file list select file with software image and press oK to start software update. Update
process will take some time. Once update is completed the receiver will display message "Update completed. Please
restart". Switch OFF main power and switch it back ON.
WARnIng Do not power off your receiver during update process and flashing data. Do not unplug the USB
device during update. This may cause damage of the data in the flash memory and the receiver will
need to be repaired.

5.7 USb

Press MEnU and select USB. The menu provides options to playback music and photo files. Supported are MP3, WMA,
JPEG, BMP files. The unit supports USB devices with FAT and FAT32 file systems.
9