Video Setting; Channel Search - Strong SRT 8110 User Manual

PART 1 • English
5.1.2 EPg (Electronic Programme guide)
The EPG is an on-screen TV guide that shows the program schedule for up to seven days in advance for every tuned
channel. Press EPg to access the menu.
Use pq to select the preferred programme. If there is more than one page of information, use the blUE button for
page up and the YElloW button for page down.
To view program schedule on other channels use tu buttons.
To book reminder for desired event press oK button.
To display a list of booked events press Info button.
You will find more details about the booking of reminders in chapter 5.4.1 Schedule.
5.1.3 Sort
Sort your channels from the following options:
By LCN Sort the channels in channel number order (ascending)
By ONID Sort the channels in order of Network ID (Broadcaster ID)
By Service Name Sort the channels in alphabetical order
Service ID Sort the channels according to the station
5.1.4 lCn (logical Channel numbering)
Set LCN ON or OFF.

5.2 video Setting

Press MEnU then select Picture. The menu provides options to adjust the video settings. Press pq to select an option
and press tu to adjust the setting. Press EXIT to exit the menu.
Aspect Ratio
You can set the display format to either 4:3 PanScan, 4:3 Letter Box, 16:9 Full Screen or Auto to get the maximum
display when watching TV.
Tip: you can change the video output format directly from view mode by pressing the YElloW button on the
remote control.
Resolution
If the video does not appear correctly, change the setting. These settings match the most common settings for HDMI.
480i: for NTSC system TV.
480P: for NTSC system TV.
576i: for PAL system TV.
576P: for PAL system TV.
720P: for NTSC or PAL system TV.
1080I: for NTSC or PAL system TV.
Tip: you can change the video resolution directly from view mode by pressing the gREEn button on the remote
control.
Tv format
If the video does not appear correctly, you need to change the settings. This should match the most common setting for
TVs in your country.
NTSC: for NTSC system TV.
PAL: for PAL system TV.
video output
CVBS: CVBS output.
RGB: RGB output.

5.3 Channel Search

Press MEnU and select Search Channel. The menu provides options to adjust the search channel settings. Select an
option and press tu to adjust the setting. Press EXIT to exit the menu.
7