Administrator's Menus; System Menu; System Configuration Wizard - Epygi QuadroM8L Administrator's Manual

QuadroM 32x/8L/26x/12Li/26xi Manual II: Administrator's Guide

Administrator's Menus

System Menu

System Configuration Wizard

The System Configuration Wizard allows the administrator to define the Quadro's Local Area Network settings and to specify regional configuration
settings to make Quadro operational in its LAN. The System Configuration Wizard MUST be run upon Quadro's first startup to make sure that it
works properly in its network environment. The Wizard allows navigating through the following basic configuration parameters and settings:
•
System Configuration (see below)
•
DHCP Settings for the LAN Interface
•
Regional Settings and Preferences (see below)
•
Emergency Codes and PSTN Access Codes Settings (see below)
DHCP Settings for the LAN are described in the chapters
below. The LAN configuration and regional settings will be
described later in this chapter.
Please Note: It is strongly recommended to leave the
factory default settings if their meanings are not fully
clear to the administrator.
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x)
Fig. II-1: System Menu in Dynamo theme
Administrator's Menus
Fig. II-2: System Menu in Plain theme
Fig. II-3: System Configuration Wizard - Start page
7