Voltage'' (Displayed Voltage Readout); Programming Components ''Diagnose'' (Diagnostic Mode) Into Unit - Cornelius FCB OVERCOUNTER POST-MIX DISPENSER Service Manual

Fcb overcounter post-mix dispenser with v3+features

Hide thumbs Also See for FCB OVERCOUNTER POST-MIX DISPENSER:

Table of Contents

2. Press ''DEFROST'' (SELECT) switch to bring up evaporator refrigeration coils inlet and common outlet tem-

perature readings in degrees Fahrenheit.

Left Reading–Refrigeration Coils Inlet No. 1

Middle Reading–Refrigeration Coils Inlet No. 2

Right Reading–Common Outlet

3. Press "ERROR RESET'' switch two times to exit from MENU SELECTIONS.

''VOLTAGE'' (DISPLAYED VOLTAGE READOUT)

Displayed voltage readout may be displayed on message display as follows:

1. Refer to PROGRAMMING MENU SELECTIONS ON MESSAGE DISPLAY and bring up ''VOLTAGE'' (DIS-

PLAYED VOLTAGE READOUT) on message display.

2. Press ''DEFROST'' (SELECT) switch to bring up voltage readout on message display.

3. Press ''ERROR RESET'' switch two times to exit from MENU SELECTIONS.

''DIAGNOSE'' (DIAGNOSTIC MODE) may be programmed into the Unit to check certain components for opera-

tion. Program ''DIAGNOSE'' into Unit and check components for proper operation as follows:

1. Refer to PROGRAMMING MAIN MENU SELECTIONS ONTO MESSAGE DISPLAY and bring up the word

''CLOCK'' on display.

2. Press ''CANCEL DEFROST'' (ADVANCE) switch to bring up ''DIAGNOSE'' menu on message display. Press

''DEFROST'' (SELECT) switch to lock in place. The word ''MOTOR 1'' will appear on message display.

3. Press ''DEFROST'' (SELECT) switch. No. 1 beater motor will start and operate while switch is pressed.

4. Press ''CANCEL DEFROST'' (ADVANCE) switch to advance and bring up the word ''MOTOR 2'' on message

display.

5. Press ''DEFROST'' (SELECT) switch. No. 2 beater motor will start and operate while switch is pressed.

6. Press ''CANCEL DEFROST'' (ADVANCE) switch to advance and bring up ''DEFROST 1'' on message dis-

play.

7. Press ''DEFROST'' (SELECT) switch. No. 1 defrost relay will click when switch is pressed.

8. Press ''CANCEL DEFROST'' (ADVANCE) switch to advance and bring up ''DEFROST 2'' on message dis-

play.

9. Press ''DEFROST'' (SELECT) switch. No. 2 defrost relay will click when switch is pressed.

10. Press ''CANCEL DEFROST'' (ADVANCE) switch to advance and bring up ''SYRUP 1'' on message display.

11. Press ''DEFROST'' (SELECT) switch. No. 1 syrup solenoid relay will click when switch is pressed.

12. Press ''CANCEL DEFROST'' (ADVANCE) switch to advance and bring up ''SYRUP 2'' on message display.

13. Press ''DEFROST'' (SELECT) switch. No. 2 syrup solenoid relay will click when switch is pressed.

14. Press ''CANCEL DEFROST'' (ADVANCE) switch to advance and bring up ''WATER 1'' message display.

2992

Table of Contents