Cylinder Freeze-Up - Cornelius FCB OVERCOUNTER POST-MIX DISPENSER Service Manual

Trouble
FROZEN PRODUCT
CONSISTENCY VARIES
EXCESSIVELY. (cont'd)

CYLINDER FREEZE-UP.

2992
Probable Cause
Primary CO regulator
2
pressure insufficient.
B. Cylinder freeze-up causing
ice formation in center of
cylinder and liquid product
channels around ice
formation.
NOTE: DEFROST AFFECTED FREEZE CYLINDER AS
INSTRUCTED.
A. Dispensed product BRIX too
low.
B. Viscosity of dispensed product
not properly adjusted.
68
Remedy
b. Primary CO regulator must be
2
adjusted from 80 to 100-psi.
B. Refer to CYLINDER
FREEZE-UP.
A. Refer to BRIX (Water-to-Syrup)
''Ratio'' too low.
B. Adjust dispensed product
viscosity as instructed.