Figure 10— Removing the Clutch Rotor Assembly
SHAFT SEAL
Remove or Disconnect (Figures 15 and 16)
Tools required:
J 5403 Snap Ring Pliers
J 9553-01 O-ring Remover
J 23128-A Seal Remover
Retainer ring using J 5403.
Shaft seal.
• Engage the knurled tangs of J 23128-A into the
recessed portion of the seal by turning the han
dle clockwise (figure 15).
O-ring using J 9553-01 (figure 16).
3.
R-4 AIR CONDITIONING COMPRESSOR 1B3-5
Figure 12— Pulley Rotor and Bearing Puller
Installation