Redial - Aastra 6737i User Manual

Using the Icom Key
IP Phone UI
1. Press the Icom key.
2. Enter the extension number of the person you wish to intercom or the BLF key for that extension.
3. After a beep tone, your phone automatically connects with the remote extension and you can speak through its
speaker.
4. To cancel intercom, press
5. When you are finished speaking, hang up the phone by placing the handset back on-hook or by pressing
or the line/call appearance key for the active call. When you hang up, the remote phone also hangs up.
You can set specific incoming Intercom call features on the 6737i IP phone using the Aastra Web UI. The following table
describes these features.
Incoming Intercom Features in Aas-
tra Web UI
Microphone Mute
Auto Answer
Play Warning Tone
Allow Barge In
For more information about the incoming Intercom features and for procedures on setting these features, see
Intercom Call Features"

Redial

IP Phone UI
• Press to dial the most recent number you dialed from the phone.
• If you are off-hook and press
• If you are on-hook and press
The redial list is available during active calls. It stores up to the last 100 numbers you called, allowing you to scroll through
and select the number you wish to redial.
Note:
Your System Administrator can set your Redial key to speed dial a specific number. Contact your System Administrator
for more information.
41-001452-00 Rev 00 – 07.2011
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
or the Cancel key.
Description
Allows you to enable or disable the microphone on the IP phone for Intercom
calls made by the originating caller.
Allows you to enable or disable the IP phone to automatically answer an Intercom
call. If auto-answer is enabled on the IP phone, the phone plays a tone (if "Play
Warning Tone" is enabled) to alert the user before answering the intercom call. If
auto-answer is disabled, the phone rejects the incoming intercom call and sends
a busy signal to the caller.
Allows you to enable or disable a warning tone to play when the phone receives
an incoming intercom call on an active line.
Allows you to enable or disable how the phone handles incoming intercom calls
while the phone is on an active call.
on page 176.
the last number you called is called back.
, a Redial List displays.
Making Calls
"Incoming
116