Using Redial Key For "Last Number Redial - Aastra 6735i User Manual

Configuring Incoming Intercom Settings
Aastra Web UI
Use the following procedure to configure incoming intercom call settings on the IP phone.
1. Click on Basic Settings->Preferences->Incoming Intercom Settings.
2. The "Auto-Answer" field is enabled by default. The automatic answering feature is turned on for the IP phone for
answering Intercom calls. To disable this field, uncheck the box.
Note:
If the Auto-Answer field is not checked (disabled), the phone rejects the incoming intercom call and sends a busy
signal to the caller.
3. The "Microphone Mute" field is enabled by default. The microphone is muted on the IP phone for Intercom calls
made by the originating caller. To disable this field, uncheck the box.
4. The "Play Warning Tone" field is enabled by default. If "Auto-Answer" is enabled, the phone plays a warning tone
when it receives in incoming intercom call. To disable this field, uncheck the box.
5. The "Allow Barge In" field is enabled by default. If "Allow Barge In" is enabled, the phone puts an active call on hold
and answers the incoming Intercom call. To disable this field, uncheck the box.
6. Click Save Settings to save your settings.

Using Redial Key for "Last Number Redial"

The IP phone has an enhanced redial user interface that allows a user to quickly redial the last number that was dialed out
from the phone. You can:
• Press the REDIAL button twice to redial the last number dialed.
• Press the REDIAL button once, scroll the list of numbers, then press the REDIAL button again to dial the number that dis-
plays on the screen.
The "last number redial" feature for the Redial key is static and is not configurable.
41-001451-00 REV00 – 07.2011
Additional Features
182