MVP Panel Lock Passcode commands
These commands are used to maintain a passcode list. From certain panels a password must be entered to remove the
panel from its cradle. Only the passcode is entered. The user is just for identifying the passcodes.
MVP Panel Lock Passcode Commands
^LPC
Clear all
users from the
User Access
Passwords list on
the Password
Setup page.
^LPR
Remove a given
user from the User
Access
Passwords list on
the Password
Setup page.
^LPS
Set the user name
and password.
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Syntax:
"'^LPC'"
Example:
SEND_COMMAND Panel,"'^LPC'"
Clear all users from the User Access Password list on the Password Setup page.
Refer to the Password Setup Page section on page 77 for more information.
Syntax:
"'^LPR-<user>'"
Variable:
user = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Panel,"'^LPR-Robert'"
Remove user named 'Robert' from the User Access Password list on the Password
Setup page. Refer to thePassword Setup Page section on page 77 for more
information.
This command allows you to:
1. Add a new user name and password OR
2. Set the password for a given user.
The user name and password combo is added to the User Access and/or Password list
in the Password Setup page. The user name must be alphanumeric.
Syntax:
"'^LPS-<user>,<passcode>'"
Variable:
user = 1 - 50 ASCII characters.
passcode = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Panel,"'^LPS-Manager,undock'"
Sets a new user name as "Manager" and the password to "undock".
Example 2:
SEND_COMMAND Panel,"'^LPS-Manager,test'"
Changes the given user name password to "test".
Refer to thePassword Setup Page section on page 77 for more information.
Programming
127