Audio Settings - AMX MVP-7500 Operation/Reference Manual

Audio Settings

The MVP-8400 provides an Audio Settings page (FIG. 82 and FIG. 83) with options that allow you to adjust volume
levels, set intercom sound and microphone levels, and set panel sounds.
FIG. 82 Audio Settings Page (MVP-7500)
FIG. 83 Audio Settings Page (MVP-8400)
Features on these pages include:
Volume Page
Back:
WiFi/Wired icon:
Connection Status icon:
Master Volume:
Digital Audio Level:
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired
(image of three networked computers).
The icon in the upper-right corner of each Setup page shows online/offline state
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark
green every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain
yellow for 3 missed blink messages and then turn red. It will return to green
when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
This section allows you to alter the current master volume level:
• Use the UP/DN buttons to adjust the volume level (range = 0 - 100).
• The Master Volume bargraph indicates the current volume level.
• The Mute button toggles the Mute feature.
Default = 50
Adjusts the volume level on the panel's internal speaker:
• Use the UP/DN buttons to adjust the volume (range = 0 - 100)
• The Internal Sound Level bargraph indicates the current sound level
• The Mute button mutes the internal speaker volume
Default = 50
Setup Pages
91