Configuring Communications
Configuring the Modero's wireless card for unsecured access to a WAP200G
In the Protected Setup page:
1.
Press the Wireless Settings button (located on the lower-left) to open the Wireless Settings page.
MVP
connection
IP info.
FIG. 17
Wireless Settings page (showing a sample unsecured configuration)
2.
Enter the SSID information by either:
FIG. 18
Site Survey of available WAPS (Unsecured WAP shown selected)
3.
From within the Wireless Security section, press the Open (Clear Text) button to open the Open (Clear Text)
Settings dialog (FIG. 19). An Open security method does not utilize any encryption methodology but does require
that an SSID (alpha-numeric) be entered. Using this method causes network packets to be sent out as unencrypted
text.
24
Automatically having it filled in by pressing the Site Survey button and from the Site Survey page, choosing
an Open WAP from within the Site Survey page and then pressing the Connect button.
Manually entering the SSID information into their appropriate fields by following steps 7
thru 9.
Wireless
card security settings
Select an OPEN
(unsecured) WAP
Connecting to the
WAP begins the
communication
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels