Wireless Settings Page - AMX MVP-7500 Operation/Reference Manual

Setup Pages

Wireless Settings Page

Use the options on the Wireless Settings page (FIG. 53 and FIG. 54) to configure communication settings for the wireless
CF card (802.11b/g), and read the device number assigned to the panel.
FIG. 53
Wireless Settings Page (MVP-7500)
FIG. 54 Wireless Settings Page (MVP-8400)
Features on this page include:
Wireless Settings Page
Back:
WiFi/Wired icon:
Connection Status icon:
56
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired
(image of three networked computers).
The icon in the upper-right corner of each Setup page shows online/offline state
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark
green every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain
yellow for 3 missed blink messages and then turn red. It will return to green
when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels