Jst; Mbt; Mdc; Sav - AMX MVP-7500 Operation/Reference Manual

Programming
"^" Button Commands (Cont.)

^JST

Set text
alignment using a
numeric keypad
layout for those
buttons with a
defined address
range.

^MBT

Set the Mouse
Button mode On
for the virtual PC.

^MDC

Turn On the
'Mouse
double-click'
feature for the
virtual PC.

^SAV

Save the
configuration
values.

^SHO

Show or hide a
button with a set
variable text
range.
124
The alignment of 0 is followed by ',<left>,<top>'. The left and top coordinates are relative
to the upper left corner of the button.
Syntax:
"'^JST-<vt addr range>,<button states range>,<new text alignment>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
new text alignment = Value of 1 - 9 corresponds to the following locations:
0
1 2 3
Zero can be used for an absolute position
4 6
5
7 8 9
Example:
SEND_COMMAND Panel,"'^JST-500.504&510.515,1&2,1'"
Sets the text alignment to the upper left corner for those buttons with variable text ranges
of 500-504 & 510-515.
Syntax:
"'^MBT-<pass data>'"
Variable:
pass data:
0 = None
1 = Left
2 = Right
3 = Middle
Example:
SEND COMMAND Panel,"'^MBT-1'"
Sets the mouse button mode to 'Left Mouse Click'.
Syntax:
"'^MDC'"
Example:
SEND COMMAND Panel,"'^MDC'"
Sets the mouse double-click for use with the virtual PC.
Syntax:
"'^SAV'"
Syntax:
"'^SHO-<vt addr range>,<command value>'"
Variable:
variable text address range = 1 - 4000.
command value = (0= hide, 1= show).
Example:
SEND_COMMAND Panel,"'^SHO-500.504&510.515,0'"
Hides buttons with variable text address range 500-504 & 510-515.
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels