AMX MVP-7500 Operation/Reference Manual page 16

MVP Modero Viewpoint Wireless Touch Panels
programmable
Stylus LED
programmable
pushbuttons
(fits within slot
on side panel)
FIG. 2 MVP Touch Panels
MVP Specifications
Models:
Dimensions (HWD):
Power Requirements:
Power Modes:
Battery Duration:
(per battery)
Memory (factory default):
Weight:
2
Stylus
• MVP-7500
• MVP-8400
• 7.09" x 10.47" x 1.47" (18.00 cm x 26.60 cm x 3.73 cm)
Without Charging:
MVP-7500:
• Constant current draw: 1.0 A @ 12 VDC
• Startup current draw: 1.5 A @ 12 VDC
MVP-8400:
• Constant current draw: 1.2 A @ 12 VDC
• Startup current draw: 1.8 A @ 12 VDC
While Charging:
MVP-7500:
• Constant current draw: 3.0 A @ 12 VDC
• Startup current draw: 3.6 A @ 12 VDC
MVP-8400:
• Constant current draw: 3.2 A @ 12 VDC
• Startup current draw: 3.8 A @ 12 VDC
• If MVP panel is mounted onto a TDS or WDS, add 0.1 A to the above
figures.
• ON: Panel is fully functional.
• STANDBY: Panel uses low power, the LCD/backlight is shutdown, LEDs still
function. Panel resumes the ON mode in ~ 1 second.
• OFF: On-board programs not running, touch screen still powered, LED not
functional. Panel resumes the ON mode in ~ 30 seconds.
• Four hours of normal use (25% On state, 25% Standby, and 50% Off).
• Two hours of continuous use.
• 64 MB SDRAM
• 64 MB Compact Flash (upgradeable to 1 GB - factory programmed)
1.85 lbs (0.84 kg)
• with 1 battery: 2.25 lbs (1.02 kg)
• with 2 batteries: 2.65 lbs (1.20 kg)
Mini-USB connector
Docking station interface connector
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
programmable
status LED
programmable
pushbuttons
(joystick
configuration)
Microphone
MVP-8400 only
Speaker (right)
MVP-8400 only
PWR connector